User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 549 System Manual
Do not specify these parameters if you want to view configuration information for
all existing Neighbour BSs in all BSs. To display information for all Neighbour BSs
in all BSs, run the following command:
npu# show nbr-triggers bs
Command
Syntax
npu# show nbr-specific bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215
StepSize 1)>
TrigName {hoReqCinrMaxNbs | hoReqRssiMaxNbs | hoReqCinrMargin |
hoReqRssiMargin} ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for
this parameter if you
want to display a
specific Specific BS
Trigger in a specific
Neighbour BS of a
specific BS. Do not
specify a value for
this parameter if you
want to display the
Specific BS Triggers
of all Neighbour BSs
in all BSs.
Optional N/A 1-16777215