User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 550 System Manual
3.8.13.7.6 Displaying Configuration Information for All Neighbour BS Parameters
To display configuration for the all Neighbour BS parameters, run the following
command:
bs-id-lsb <(1 to
16777215 StepSize
1)>
The Neighbour BS
ID.
Specify a value for
this parameter if you
want to display a
specific Specific BS
Trigger in a specific
Neighbour BS of a
specific BS. Do not
specify a value for
this parameter if you
want to display the
Specific BS Triggers
of all Neighbour BSs
in all BSs.
Optional N/A 1-16777215
TrigName
{hoReqCinrMaxNbs |
hoReqRssiMaxNbs |
hoReqCinrMargin |
hoReqRssiMargin} ]
The Trigger name
Specify only if you
want to display a
specific Specific BS
Trigger of a specific
Neighbour BS in a
specific BS. Do not
specify if you want to
display all Specific BS
Triggers parameters
of all Neighbour BSs
in all BSs
 {hoReqCinrMaxNbs
 hoReqRssiMaxNbs
 hoReqCinrMargin
 hoReqRssiMargin}
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
BSIDLSB :value>
hoReqRssiMaxNbs :value>
Command
Modes
Global command mode