User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 378 System Manual
3.3.14.2.6 Displaying the Active Clear Timer and Event Rate Limit
The Active Clear Timer parameter indicates the hard-coded value for the
suppression interval aimed at preventing too fast repetitions of alarm active-clear
(alarm toggling). The Event Rate Limit is practically identical to the trap-rate-limit
parameter (see previous section) indicating the hard-coded value for the
maximum number of traps per second.
To display one of these parameters, run the following command:
npu# show {activeClearTimer | eventRateLimit}
Command
Syntax
npu# show trap-rate-limit
Privilege
Level
1
Display
Format
Maximum number of traps sent is 20 traps per second.
Command
Modes
Global command mode
Command
Syntax
npu# show {activeClearTimer | eventRateLimit}
Privilege
Level
1
Display
Format
activeClearTimer: <value>
or:
eventRateLimit: <value>
Command
Modes
Global command mode