User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 581 System Manual
3.8.16.5.5 Displaying Configuration Information for Airframe Downlink Data Zone
Parameters
To display configuration for the Airframe Downlink Data Zone parameters, run
the following command:
npu# show airframe-dldatazone bs [<(1 to 16777215 StepSize 1)>]
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Airframe Downlink Data Zone parameters of BS 66503,
run the following command:
npu# show airframe-dldatazone bs 66053
Do not specify the BS ID if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show airframe-dldatazone bs
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
ULFeedbackZoneNumberofSub-Channels :<value>
ULFeedbackZonePermutationBase :<value>
Command
Modes
Global command mode
Command
Syntax
npu# show airframe-dldatazone bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1