User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 583 System Manual
npu# show airframe-uldatazone bs
3.8.16.5.7 Displaying Configuration Information for Airframe Dynamic
Permutation Parameters
To display configuration for the Airframe Dynamic Permutation parameters, run
the following command:
Command
Syntax
npu# show airframe-uldatazone bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Airframe Uplink
Data Zone parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display the Airframe
Uplink Data Zone parameters
of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
ULDATAPermutationBase :<value>
StartAllocation(Slots) :<value>
ULDATAZoneNumberofSub-Channels :<value>
Command
Modes
Global command mode