User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 585 System Manual
3.8.16.5.8 Displaying Configuration Information for Airframe MIMO Parameters
To display configuration for the Airframe MIMO parameters, run the following
command:
npu# show airframe-mimo bs [<(1 to 16777215 StepSize 1)>]
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Airframe MIMO parameters of BS 66503, run the following
command:
npu# show airframe-mimo bs 66053
Do not specify the BS ID if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show airframe-mimo bs
Command
Modes
Global command mode
Command
Syntax
npu# show airframe-mimo bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Airframe Dynamic
Permutation parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display the Airframe
Dynamic Permutation
parameters of all BSs.
Optional N/A 1-16777215