User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 631 System Manual
 “Deleting an MS from the Advanced Mode Collection List” on page 631
 “Displaying the MSs in the Advanced Mode Collection List” on page 632
3.8.27.1 Configuring an MS entry in the Advanced Mode Collection
List
From the BS configuration mode, run the following command to add an MS to the
advanced mode collection list or to modify an existing entry:
npu(config-bs-66053)# ms-pm-mac <(1 to 10 StepSize 1)> [Mac-addr
<Mac-addr> ]
For example, to add MS 2 with MAC address 0e-10-e7-11-22-ff to the list (or to
modify an existing entry for MS 2)), run the following command:
npu(config-bs-66053)# ms-pm-mac 2 Mac-addr 0e10e71122ff
3.8.27.2 Deleting an MS from the Advanced Mode Collection List
To delete an MS from the list, run the following command:
npu(config-bs-66053)# no ms-pm-mac <(1 to 10 StepSize 1)>
Command
Syntax
npu(config-bs-66053)# ms-pm-mac <(1 to 10 StepSize 1)> [Mac-addr
<Mac-addr> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 10 StepSize 1)> The index of the MS MAC
address entry
Mandatory N/A 1 - 10
Mac-addr <Mac-addr>
]
The MAC address of the
MS’s entry
Mandatory MAC address
in the format
xxxxxxxxxxxx
x = 0-f.
Command
Modes
bs configuration mode