User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 632 System Manual
3.8.27.3 Displaying the MSs in the Advanced Mode Collection List
To display configuration information of MSs in the Advanced Mode Collection List,
run the following command:
npu# show ms-pm-mac bs [<(1 to 16777215 StepSize 1)> index <(1 to 10
StepSize 1)> ])
Specify the BS ID and index if you want to display information for a particular
entry in a particular BS.
For example, to see the configuration of entry 2 in BS 66053 run the command:
npu# show ms-pm-mac bs 66053 index 3
Do not specify these parameters if you want to view information for all existing
BSs. To display information for all BSs, run the following command:
npu# show ms-pm-mac bs
Command
Syntax
npu(config-bs-66053)# no ms-pm-mac <(1 to 10 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 10 StepSize 1)> The index of the entry to
be deleted. Must be an
index of an existing entry.
Mandatory N/A 1 - 10
Command
Modes
bs configuration mode
Command
Syntax
npu# show ms-pm-mac bs [<(1 to 16777215 StepSize 1)> index <(1 to 10 StepSize 1)> ])
Privilege
Level
1