User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing Sectors
4Motion 646 System Manual
3.9.1.3 Restoring Default Values for Sector Configuration
Parameters
After enabling the Sector Parameters configuration mode you can restore the
default values for parameters in the following parameters tables:
 Sector Definition (refer to Section 3.9.1.3.1)
 Sector Reserved (refer to Section 3.9.1.3.2)
3.9.1.3.1 Restoring the Default Values of Sector Definition Parameters
To restore the one or all of the non-mandatory parameters to the default values,
run the following command:
npu(config-sector-params-1)# no sector-definition [sector-name] [heading]
Run the following command to restore the sector definition parameters to the
default values:
npu(config-sector-params-1)# no sector-definition
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[reserved-N <string
(32)>] (N=1-4)
Reserved parameter number N Optional null (an
empty
string)
A string of 32
printable
characters.
Command
Modes
sector-params configuration mode
NOTE
Refer to Section 3.9.1.2.1 for a description and default values of these parameter.
Command
Syntax
npu(config-sector-params-1)# no sector-definition [sector-name]
[heading]
Privilege
Level
10