User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing Sectors
4Motion 650 System Manual
3.9.1.6.2 Displaying Configuration Information for Sector Reserved Parameters
To display configuration information for the reserved parameters of a specific or
all Sector objects, run the following command:
npu# show sector-reserved [sector-id <(1 to 6 StepSize 1)>]
Specify the Sector ID (1-6) if you want to display configuration for a particular
Sector. Do not specify a value for this parameter if you want to view configuration
for all existing Sector objects.
Command
Modes
Global command mode
Command
Syntax
npu# show sector-reserved [sector-id <(1 to 6 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 6 StepSize
1)>
The Sector ID.
Specify a value for this
parameter if you want to
display the reserved
parameters of a specific
Sector. Do not specify a value
for this parameter if you want
to display the
reserved
parameters of all Sectors.
Optional N/A 1-6
Display
Format
(for each
existing
ODU object
if requested
for all
ODUs)
SectorID :<value>
ReservedParameter1 :<value>
ReservedParameter2 :<value>
ReservedParameter3 :<value>
ReservedParameter4 :<value>