User's Manual

Chapter 3 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 657 System Manual
3.10.1.2 Displaying the Current Status of Shelf Components
You can view the current status of the following shelf components:
 NPU
 PSU
 PIU
 AVU or (specific fan)
To view the current status of all shelf components, run the following command:
npu# show shelf status [{NPU [<slot id>] | PSU [<slot id (1-4)>]
|PIU [<slot id (1-2)>] | AVU | Fan [<fan_num (1-10)>]}]
For example, run the following command to view the status of the PSU, slot# 4:
npu# show shelf status PSU 4
To view the status of all the shelf components, run the following command:
Display
Format
Slot# Card Type
1 <notInstalled/au4x4Modem/other>
2 <notInstalled/au4x4Modem/other>
3 <notInstalled/au4x4Modem/other>
4 <notInstalled/au4x4Modem/other>
5 npu
6 notInstalled
7 <notInstalled/au4x4Modem/other>
8 <notInstalled/au4x4Modem/other>
9 <notInstalled/au4x4Modem/other>
Command
Modes
Global command mode
NOTE
Refer Figure 3-1 for more information about the slot IDs assigned to each shelf component.