User's Manual

Chapter 3 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 663 System Manual
The following table lists the commands for clearing statistics counters of a
selected counters group:
* Note that the user can clear statistics counters only for software components
that are configurable by the user.
3.10.3 Displaying Statistics for Physical and IP
Interfaces
You can display statistics counters for the physical and IP interfaces. For more
details on the displayed counters refer to the Performance Management
document. The following table lists the commands for displaying statistics
counters for the physical and IP interfaces:
MS State Change Functionality
npu# show msscfn statistics
Table 3-36: Commands for Clearing Software Components Statistics*
Function Command for Resetting Counters
SFA
npu# clear sfa statistics
AAA Client
npu# clear radius statistics
DHCP Proxy
npu# clear dhcp-proxy statistics
DHCP Relay
npu# clear dhcp-relay statistics
DHCP Server
npu# clear dhcp-server statistics
Table 3-37: Commands for Displaying Statistics for All Physical and IP Interfaces
Example
AU#1 Internal Port npu# show interface fastethernet 0/1 counters
AU#2 Internal Port npu# show interface fastethernet 0/2 counters
AU#3 Internal Port npu# show interface fastethernet 0/3 counters
AU#4 Internal Port npu# show interface fastethernet 0/4 counters
AU#5 Internal Port npu# show interface fastethernet 0/5 counters
AU#6 Internal Port npu# show interface fastethernet 0/6 counters
AU#7 Internal Port npu# show interface fastethernet 0/7 counters
Management Port npu# show interface fastethernet 0/8 counters
Cascade Port npu# show interface gigabitethernet 0/9 counters
Table 3-35: Commands for Displaying Software Components Statistics