User's Manual

Chapter 3 - Operation and Administration Using the CLI Troubleshooting
4Motion 679 System Manual
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
[{source
interface
<interface-typ
e>
<interface-id>
|destination
interface
<interface-typ
e > <
interface-id
>}]
Indicates whether port
monitoring is to be
disabled for a source or
destination interface.
Specify the interface
type and interface ID
for the interface to be
configured.
If source/destination
interface types/id are
not specified then all
enabled port
monitoring sessions
will be disabled.
Mandatory N/A Interface type:
fastethernet
gigabitetherne
Interface ID:
0/1 (for Fast
Ethernet)
0/2 (for Fast
Ethernet)
0/3 (for Fast
Ethernet)
0/4 (for Fast
Ethernet)
0/5 (for Fast
Ethernet)
0/6 (for Fast
Ethernet)
0/7 (for Fast
Ethernet)
0/8 (for Fast
Ethernet)
0/9 (for Gigabit
Ethernet)
{ rx | tx |
both }
Indicates whether the
incoming, outgoing or
both types of traffic is
to be disabled for
mirroring for the source
interface.
Optional Both
rx
tx
both
Command
Modes
Global configuration mode