User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 408 System Manual
 “Displaying the Site General Information Parameters” on page 409
3.3.15.7.1 Configuring the Site General Information for the 4Motion Shelf
Run the following command to configure the 4Motion shelf location information,
such as the rack number and location:
npu(config)# site {Name <name (32)> | Address <address(70)> |
RackLocation <rack no. + position in rack (32)> | ContactPerson
<name (32)>}
For example, run the following command if you want to specify the site name:
npu(config)# site name Site 12
IMPORTANT
An error may occur if the length of any of these parameters exceeds the specified range. Refer the
syntax description for more information about the appropriate values and format for configuring
these parameters.
Command
Syntax
npu(config)# site (Name <name (32)> | Address <address(70)> |
RackLocation <rack no. + position in rack (32)> | ContactPerson <name
(32)>)
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
Name <name
(256)>}
Indicates the name of the
4Motion shelf.
Optional N/A String (up to 32
characters)
Address
<address
(256)>}
Indicates the address of the
4Motion site.
Optional N/A String (up to 70
characters)
RackLocation
<rack no. +
position in
rack (256)>}
Indicates the rack number
and location of the 4Motion
shelf.
Optional N/A String (up to 32
characters)
ContactPerson
<name (256)>
Indicates the name of person
who is administering the
4Motion shelf.
Optional String (up to 32
characters)