User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing ODUs
4Motion 429 System Manual
3.6 Managing ODUs
Up to 28 ODU objects can be created and configured, corresponding to up to 28
ODUs that can be installed. Up to four ODU Ports, numbered 1 to 4, can be
created and configured for each ODU. However, for a 1by1 ODU only port number
1 is meaningful. For a 2by1 ODU only ports 1 and 2 are meaningful.
This section include:
 “Configuring ODUs”, Section 3.6.1
 “Configuring ODU Ports”, Section 3.6.2
3.6.1 Configuring ODUs
1 Enable the ODU configuration mode for the selected ODU (refer to
Section 3.6.1.1)
2 You can now execute any of the following tasks:
» Configure one or more of the parameters tables of the ODU (refer to
Section 3.6.1.2)
» Restore the default values of parameters in one or more of the parameters
tables of the ODU (refer to Section 3.6.1.3)
3 Terminate the ODU configuration mode (refer to Section 3.6.1.4)
In addition, you can, at any time, display configuration and status information for
each of the parameters tables of the ODU (refer to Section 3.6.1.6) or delete an
existing ODU object (refer to Section 3.6.1.5).
To configure an ODU: