User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration

4Motion 366 System Manual

3.3.13.2 Disabling Collection and Storage of Performance Data

To disable collection and storage of performance data for one group, run the

following command:

To disable collection and storage of performance data for an NPU counters group:

npu(config)# no pm-group enable npu {BckhlPort | MgmtPort |

| ProxyDhcp | RelayDhcp | ServerDhcp | MsStateChangeFn}

To disable collection and storage of performance data for an NPU counters group:

npu(config)# no pm-group enable au { BsDeRegistrationTable |

BsIntegrity | BsMobilityTable | BsNetworkEntryTable |

BsTrafficTable | BsUtilizationTable | BsIdleModeTable |

BsFastFeedbackCQIHandlingTable | BsAckNackChannelHandlingTable |

BsEndTransactionUpdateTable | BsDlDataZoneFrameHistogramsTable |

BsTxR1NetTrafficTable | BsRxR1NetTrafficTable |

BsTxR1TotalTrafficTable | BsRxR1TotalTrafficTable |

BsDLHARQSbDropsTable | BsDLHARQTransmissionTable | BsGeneral |

Bsallmsbasicmode | Bsspecificmsadvancedmode}

For example, run the following command if you want to disable performance data

collection and storage for the data path function:

npu(config)# no pm-group enable npu DatapathFn

NOTE

Using this command, you can disable collection of performance data for only one group at a time.

For more information about the group names in this command, refer to Table 3-25.

Command

Syntax

npu(config)# no pm-group enable npu

{BckhlPort | MgmtPort | CascPort |

AuPortTable

DatapathFn

RelayDhcp

| ServerDhcp | MsStateChangeFn}

npu(config)# no pm-group enable au { BsDeRegistrationTable |

BsIntegrity | BsMobilityTable | BsNetworkEntryTable | BsTrafficTable |

BsUtilizationTable | BsIdleModeTable | BsFastFeedbackCQIHandlingTable |

BsAckNackChannelHandlingTable | BsEndTransactionUpdateTable |

BsDlDataZoneFrameHistogramsTable | BsTxR1NetTrafficTable |

BsRxR1NetTrafficTable | BsTxR1TotalTrafficTable | BsRxR1TotalTrafficTable

| BsDLHARQSbDropsTable | BsDLHARQTransmissionTable | BsGeneral |

Bsallmsbasicmode | Bsspecificmsadvancedmode}