User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 276 System Manual
VID Map Range parameters (see Section 3.3.11.14.7.2)
3.3.11.14.7.1 Configuring the Accounting Parameters of a VPWS-Mapped Service Group
run the following command to configure the accounting parameters for the service
group:
npu(config-srvcgrp-VPWS-Mapped)# config {acct {none|time} |
acctInterimTmr <integer(0|5-1600)>}
NOTE
You can display configuration information for the service group. For details, refer to
Section 3.3.11.15.2.
Command
Syntax
npu(config-srvcgrp-VPWS-Mapped)# config {acct {none|time} |
acctInterimTmr <integer(0|5-1600)>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values