User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 291 System Manual
[dlqos-traffic
priority
<value(0-7)>]
Denotes the traffic priority to
be applied to the downlink
traffic carried by the service
flow.
Although available for all
service flows, not applicable
for service flows with UGS
uplink data delivery type.
Optional 0 0-7, where 7 is
highest
[ul-rsrv-rate-
min
<integer(0-400
00000)>]
tthe minimum rate in bps
reserved for this uplink
service flow.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, NRTVR,
RTVR, ERTVR).
For NRTVER, RTVR and
ERTVR-cannot be higher
than ulqos-maxsustainedrate.
Optional 250000 0- 40000000
[ul-latency-ma
x <integer>]
The maximum latency in ms
allowed in the uplink.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, RTVR,
ERTVR).
If uplink data delivery type is
ERTVR or UGS,the default
value should be 90ms.
Optional 500 0- 4294967295
[ul-tolerated-
jitter
<integer)>]
the maximum delay variation
(jitter) in milliseconds for this
uplink service flow.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, ERTVR)
Optional 0 0- 4294967295