User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 331 System Manual
3.3.11.15.4.13Displaying Configuration Information for Classification Rules
To display all or specific classification rules, run the following command:
npu# show clsf-rule [<rulename>]
Specify the classification rule name if you want to display configuration
information for a particular rule. Do not specify a value for this parameter if you
want to view configuration information for all classification rules.
IMPORTANT
An error may occur if you provide an invalid value for the rulename parameter. Refer the syntax
description for more information about the appropriate values and format for configuring this
parameters.
Command
Syntax
npu# show clsf-rule [<rulename>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<rulename>] Denotes the name of the
classification rule that you
want to display.
Specify this parameter only if
you want to display a specific
classification rule. If you do
not specify a rule name, it
displays all configured
classification rules.
Optional N/A String