User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 332 System Manual
3.3.11.15.4.14Deleting Classification Rules
Run the following command to delete one or all classification rules:
npu(config)# no clsf-rule [<rulename>]
Display
Format for
each L3
rule
Classification Rule Configuration :
ClsfRulename <value>
clsfRuleType: L3
Priority <value>
Phs rulename <value>
IpTosLow <value> IpTosHigh <value> IpTosMask <value> IpTosEnable <0/1>
clsfRuleSrcAddr <value> clsfRuleMask <value> SrcAddrEnable <0/1>
clsfRuleDstAddr <value> clsfRuleAddrMask <value> DstAddrenable <0/1>
clsfRuleSrcPort Start <value> clsfRuleSrcPort End <value>
clsfRulePortEnable <0/1>
clsfRuleDstPort Start <value> clsfRuleDstPort End <value>
clsfRulePortEnable <0/1>
Display
Format for
each L2
rule
ClsfRulename <value>
clsfRuleType: L2
Cvid <value>
Command
Modes
Global command mode
CAUTION
Specify the rule name if you want to delete a specific classification. Otherwise all the configured
classification rules are deleted.
Command
Syntax
npu(config)# no clsf-rule [<rulename>]
Privilege
Level
10