User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 176 System Manual
IMPORTANT
An error may occur if:·
 You specify an invalid ACL number. The ACL number should be between 1 and 99 in the
standard mode, and between 100 and 199 in the extended mode.
 The ACL name you have specified is already used for another ACL or is more than 20
characters.
Command
Syntax
npu(config)# ip access-list {standard <access-list-number (1-99)> |
extended <access-list-number (100-199)>}[name<string>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
standard
<access-list-n
umber (1-99)>
| extended
<access-list-n
umber
(100-199)>
Denotes the number of the
standard or extended ACL
that is to be created for which
the ACL configuration mode
is to be enabled. If you are
creating a new ACL, the ACL
configuration mode is
automatically enabled when
you execute this command.
Note: ACL 199 is reserved for
QoS classification rules and
cannot be used for creating
Permit/Deny rules.
Mandatory N/A
 standard
1-99
 extended
(100-198)
[name<string>] Indicates the name of the
ACL to be created for which
the ACL configuration mode
is to be enabled.
Optional ACL
name
String (upto 20
characters)
Command
Modes
Global configuration mode