User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 217 System Manual
3.3.11.9 Managing the MS State Change Functionality
The MS state change functionality manages MS states within an MS context.
MS State Change parameters can be configured only by the vendor.
To display configuration information for the MS state change functionality, run
the following command:
npu# show msscfn
The following table provides some details on these parameters:
Parameter Description
ctxtfnTimerContextReq The period, in milliseconds, for which the NPU waits for a response to the
context request. If the NPU does not receive a response to this request
within the period specified by this timer, the NPU retransmits this request.
ctxtfnCounterContextReqMax The maximum number of times the NPU will retransmit a context request.
ctxtfnTimerContextRprt The period, in milliseconds, for which the NPU waits for the context report
acknowledgement. At the end of this period, the NPU retransmits the
context report.
ctxtfnCOUNTerContextRprtMax The maximum number of times, the NPU retransmits the context report.
Command
Syntax
npu# show msscfn
Privilege
Level
1
Display
Format
MS State Change Function Configuration :
msscfnTimerMsscRsp <value>
msscfnCounterMsscRspMax <value>
msscfnTimerSbcHold <value>
msscfnTimerRegHold <value>
msscfnTimerMsscDrctvReq <value>
msscfnCounterMsscDrctvReqMax <value>
Command
Modes
Global command mode