User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 222 System Manual
<intf-type((1<
R3> - 0<R6>)|
255<ANY>)>
Denotes the type of interface
for which you are defining the
bearer plane QoS rule.
Mandatory
when
creating a
new Bearer
Plane QoS
Rule.
N/A
 0: Indicates
the R6
(internal)
interface
 1: Indicates
the R3
(external
interface))
 255:
Indicates
that the
parameter
should be
ignored for
packets
transmitted
on both
internal and
external
interfaces.
<srvc-type(0<U
GS> | 1<RTVR>
| 2<NRTVR> |
3<BE> |
4<ERTVR> |
255<ANY>)>
Denotes the service type of
the service flow (see
“Specifying Service Flow
Configuration
Parameters” on
page 288
) provided as an
input classification parameter
for the bearer plane QoS rule.
This parameter is used to
match the outer-DSCP and
VLAN-priority values for a
service flow
Mandatory
when
creating a
new Bearer
Plane QoS
Rule
N/A
 0 (UGS)
 1 (RTVR)
 2 (NRTVR)
 3 (BE)
 4 ERTVR
 255 (ANY):
Indicates
that the
parameter
should be
ignored for
packets
transmitted
on both
internal and
external
interfaces.