User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 166 System Manual
3.3.8.4 Displaying ACL 199 Configuration Information
Run the following command to display the configuration information for ACL 199:
npu# show access-lists [{199 | <access-list-199-name}]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{enable |
disable}
Indicates whether QoS
marking should be enabled or
disabled for a specific ACL.
Mandatory disable
 enable
 disable
199 Indicates the identifier of the
ACL for which the QoS
marking is to be activated.
You musr specify 199.
Mandatory N/A 199
Command
Modes
Global configuration mode
IMPORTANT
An error may occur if the ACL name you have specified does not exist.
Command
Syntax
npu# show access-lists [199| <access-list-199-name}]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[199 |
<access-list-1
99-name}]
To view configuration
information for ACL 199,
specify 199 or the name
configured for this ACL.
Mandatory
for viewing
information
for ACL 199.
N/A
 199
 String; the
name
configured
for ACL
199.