User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 238 System Manual
Specify a value for the intf-alias parameter if you want to display configuration
information for a particular service interface. Do not specify a value for this
parameter if you want to view configuration information for all service interfaces.
Command
Syntax
npu# show srvc-intf intf-alias>
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<intf-alias>
The alias of the service
interface that you want to
display. If you do not specify a
value for this parameter, all
the services interfaces that
are configured, are displayed.
Optional N/A String
Display
Format
IP-IP
Service
Interface
% Asn-gateway Srvc Intf config
Srvcif-Alias <string>
SrvcifDescr <string>
intf-type IP-IP
SrvcifTunSrcIpAddr <IP address>
SrvcifTunDstIpAddr <IP address>
Tunnel-Chksum is <Disable/Enable>
TunIPIPMTU <size>
if-alias <string>
if-descr <string>
intf-type IP-IP
tun-src-ip <IP address>
tun-dst-ip <IP address>
tun-chksum <Enable/Disable>
tun-mtu <value>