User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 242 System Manual
3.3.11.13.1.3 Terminating the AAA Client Configuration Mode
Run the following command to terminate the AAA client configuration mode:
npu(config-aaa)# exit
3.3.11.13.1.4 Displaying Configuration and Status Information for the AAA Client
To display one or all AAA clients, run the following command:
npu# show aaa-client <client-alias>
[rad-sharedsec
ret <string>]
Denotes the shared secret
between the AAA client and
the AAA server.
Optional default String (1 to 49
characters)
[rad-CallingSt
ationId
{Binary |
UTF-8}]
The format of the MAC
address used to define the
Calling Station ID
Optional UTF-8
 Binary
 UTF-8
Command
Modes
AAA client configuration mode
Command
Syntax
npu(config-aaa)# exit
Privilege
Level
10
Command
Modes
AAA client configuration mode
Command
Syntax
npu# show aaa-client <client-alias>
Privilege
Level
1