User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 243 System Manual
3.3.11.13.2 Managing Global RADIUS Configuration Parameters
Global RADIUS configuration parameters for AAA clients determine how AAA
clients should send access requests. This section describes the commands to be
used for:
 “Configuring Global RADIUS Parameters” on page 243
 “Restoring the Default Global RADIUS Configuration Parameters” on page 245
 “Displaying Global RADIUS Configuration Parameters” on page 246
3.3.11.13.2.1 Configuring Global RADIUS Parameters
To configure the global RADIUS configuration parameters to be used for all AAA
clients, run the following command:
npu(config)# radius <[accessreq-retries <retransmissions>]
[accessreq-interval <timeout>] [nasid <nas-identifier>]
[timezone-offset <time-offset(0-86400)>] [mtu <framed mtu
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<client-alias
>]
Denotes the client-alias for
which the associated AAA
client information is to be
displayed. In the current
release the client-alias of the
supported client is default.
Optional N/A String
Display
Format
AAA-client :
Src-intf(IP) :
Primary-ServerAddr :
Radius Shared Secret : <not available for display>
Server-Mac-Format :
Command
Modes
Global command mode