User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 252 System Manual
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[srvcif-alias
<service
interface>]
Denotes the pre-defined IP or
VLAN service interface alias
to be used as the data path
for traffic towards the core
network.
Note that a Service Interface
alias can be associated only
to a single Service Group.
Mandatory N/A String
[waitdhcp-hold
time
<timeout>]
Denotes the period, in
seconds, for which the NPU
waits for an IP address
allocation trigger (MIP
registration request / DHCP
discover) from the MS.
If you specify the value of this
parameter as 0, no timer is
started and the NPU will wait
infinitely for the IP address
allocation trigger.
Optional 0 0-86400
[dhcp-ownaddr
<ipv4addr>]
Denotes the IPv4 address of
the DHCP server/ relay/
proxy.
Must be unique in the
network.
For a service group using a
VLAN service interface,
should be in same subnet
with the Default Gateway
configured for the service
interface associated with the
service group. Subnet mask
is taken as the default subnet
mask i.e 255.255.255.0.
Note: In DHCP Server mode,
the DHCP server IP address
must be in the same subnet
but outside the range
allocated for users address
pool as provisioned in the
DHCP Server.
Mandatory N/A Valid IP
Address