User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 112 System Manual
IMPORTANT
An error may occur if:
 The original and/or translated VLAN ID that you have specified is not within the allowed range.
 The translated VLAN ID that you have specified is already a member VLAN for this port.
 You are trying to create a VLAN translation entry for a VLAN that is not a member of DATA port.
 A VLAN translation mapping already exists for the original VLAN IDs that you have specified.
Command
Syntax
npu(config-if)# vlan mapping <integer(9|11-100|110-4094)>
<integer(9|11-100|110-4094)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<integer(9|11-
100|110-4094)>
The first VLAN ID Indicates
the VLAN ID of the VLAN for
which VLAN translation is
required.
Legitimate values include:
 The Bearer VLAN ID
(default 11).
 The External
Management VLAN ID
(default 12) - only in
In-Band Connectivity
Mode.
Mandatory N/A 9, 11-100,
110-4094
<integer(9|11-
100|110-4094)>
Indicates the translated VLAN
ID that is being mapped to the
original VLAN ID.
Mandatory N/A 9, 11-100,
110-4094
Command
Modes
Interface configuration mode