User's Manual

Document History
4Motion xxi System Manual
Configuring Airframe Cyclic Delay
Parameters
Section 3.8.16.2.4
Updated dependencies. The values are set by
internal logic.
August 2008
Configuring Airframe Linear Delay
Parameters
Previousely Section 4.8.16.2.5
Updated dependencies. The values are set by
vendor file.
August 2008
Configuring Airframe Mapping
Parameters
Previousely Section 4.8.16.2.6
Updated dependencies. The values are set by
internal logic.
August 2008
Configuring Airframe Receive
Parameters
Previousely Section 4.8.16.2.7
The values are set by internal logic. August 2008
Configuring Antenna Parameters
Section 3.7.2
Updated possible values and default for
antenna-product-id.
August 2008
Configuring Airframe Uplink
Feedback Zone Parameters
Section 3.8.16.2.4
Value of subchannels is set internally
according to bandwidth.
August 2008
Configuring Airframe Downlink Data
Zone Parameters
Section 3.8.16.2.5
Value of subchannels is set internally
according to bandwidth.
August 2008
Configuring Airframe Uplink Data
Zone Parameters
Section 3.8.16.2.6
Value of subchannels-number is set internally
according to bandwidth.
startallocation is hard-coded (value=0).
August 2008
Configuring Airframe MIMO
Parameters
Section 3.8.16.2.8
bcast-msgzone-loc is hard coded (set to
nonSTCzoneOnly).
August 2008
Configuring Ranging Parameters
Section 3.8.23.2
Updated valid values for start-of-rng-codes. August 2008
Managing BS Feedback Allocation
Parameters
Section 3.8.7
Updated valid values for ir-cdma.
The value for max-cqi is set by vendor file.
Updated default value according to
bandwidth.
August 2008
Configuring Power Control Target
Noise and Interference Level
Parameters
Section 3.8.6.2.1
cqi-ack-ranging cannot be modified. August 2008
Configuring the Power Control
Maximum EIRP
Section 3.8.6.2.2
maxeirp cannot be modified. August 2008
Topic Description Date Issued