User's Manual

Document History
4Motion xxii System Manual
Configuring the Power Control
Required C/N Level Parameters
Section 3.8.6.2.2
All parameters cannot be modified. August 2008
Configuring Service Parameters
Section 3.8.4.2
max-subburst is not relevant.
trgt-err-rate cannot be modified.
August 2008
Configuring the Unique Identifier for
the 4Motion Shelf
Section 3.3.15.8.1
A change in site identifier will take effect after
reset.
Special procedure needed when changing the
site identifier of a device managed by
AlvariSTAR.
August 2008
Managing the IP Connectivity Mode
Section 3.3.1
Added AU maintenance IP domain.
Added note on VLAN operation mode of the
ports (tagged/untagged).
August 2008
Configuring Physical and IP
Interfaces
Section 3.3.2
Added AU maintenace IP domain. August 2008
Configuring Parameters for VLAN
Service Interface
Section 3.3.11.12.2.2
A Service Interface VLAN ID shall not conflict
also with AU Maintenance VLAN.
August 2008
Configuring BS Keep-Alive
Parameters
Section 3.8.26.1
Updated default values of tx-cnt and rtx-time. August 2008
Managing Scheduler Parameters
Section 3.8.29
New fearure August 2008
Configuring AU Connectivity
Section 3.5.2.3
Updated description of service-ip. August 2008
Chapter 2 - Installation Updated instruction for installing 4x2 ODUs
Updated instructions for installing GPS
Receiver.
Added Macro Outdoor BTS instalation
instructiond
August 2008
ODUs
Tables
1-3, 1-6 (new), 1-7,
1-11, 1-12 (new), 1-16 (new),
Section 3.6.1.1 (added note,
removed tables of currently available
ODUs)
Updated ODUs August 2008
Topic Description Date Issued