User Manual

Chapter 2 - Installation Installing the ODU
4Motion 49 System Manual
2.1.4 Installing the 4x2 ODU
2.1.4.1 AU-ODU Package Contents
 ODU (weight 15.5 kg +/- 1.5 kg)
 Carriage for ODU (weight 6 kg)
 Four M10X30 screws
 Pole Mounting Kit for one ODU: (weight ~6 kg)
» Two M10 clamps for 1.5”-6” poles
» Four M10x265 threaded rods
» Eight M10 nuts
» One M6X12 grounding screw
» Eight M10 spring washers
» Eight M10 flat washers
2.1.4.2 Sun Guard Package Content
 4x2 ODU Sun Guard
 Four M6X16 screws
Table 2-4: 1x1 ODU Connectors
Name Connector Functionality
IF TNC jack Connection to the AU/ODU Power Feeder
ANT N-Type jack, 50 Ohm Connection to an external antenna
(GND) Grounding screw Connection to ground (earth)
IMPORTANT
The weight of each ODU is 15.5 kg (+/- 1 kg) and the weight of the Pole Mounting
Kit is approximately 6 kg. Be sure to plan the installation accordingly. It is
recommended to use a harness to lift the units.
Install the AU-ODUs using the supplied kit only.