User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 801 System Manual
4.10.2.5.2 Resetting Data Path Statistics
Run the following command to reset statistics for the data path functionality:
npu# clear datapath statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.6 Managing Statistics for the Context Function
This section describes the commands to be used for:
 “Displaying Statistics for the Context Function” on page 801
 “Resetting Statistics for the Context Function” on page 803
4.10.2.6.1 Displaying Statistics for the Context Function
You can display statistics counters that provide information about the requests
and reports transmitted and received by the Context function. The following table
lists the statistics counters for the Context function:
dpPathDeregRprtDrop = <value>
dpPathDeregRprtAckRx = <value>
dpPathDeregRprtAckTx = <value>
dpPathDeregRprtAckDrop = <value>
dpActiveSF = <value>
dpActiveGRESessions = <value>
Command
Modes
Global command mode
NOTE
The privilege level of this command is 15.
Table 4-36: Statistics Counters for the Context Function
Statistics Counter Indicates the number of...
ctxtfnCtxtReqTx Context requests transmitted by the
Context function (NPU). This does not
include retransmissions.