User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 803 System Manual
4.10.2.6.2 Resetting Statistics for the Context Function
Run the following command to reset statistics for the context function:
npu# clear contextfn statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.7 Managing Statistics for the MS State Change Functionality
This section describes the commands to be used for:
 “Displaying Statistics for the MS State Change Functionality” on page 803
 “Resetting Statistics for the MS State Change Functionality” on page 806
4.10.2.7.1 Displaying Statistics for the MS State Change Functionality
You can display statistics counters that provide information about the requests
and responses transmitted and received by the MS state change functionality. The
following table lists the statistics counters for the MS state change functionality:
Display
Format
Context Function Statistics :
ctxtfnCtxtReqTx = <value>
ctxtfnCtxtReqRtx = <value>
ctxtfnCtxtReqRx = <value>
ctxtfnCtxtReqDrop = <value>
ctxtfnCtxtRprtTx = <value>
ctxtfnCtxtRprtRtx = <value>
ctxtfnCtxtRprtRx = <value>
ctxtfnCtxtRprtDrop = <value>
ctxtfnCtxtRprtAckTx = <value>
ctxtfnCtxtRprtAckRx = <value>
ctxtfnCtxtRprtAckDrop = <value>
ctxtfnPkmv2Failure = <value>
Command
Modes
Global command mode
NOTE
The privilege level of this command is 15.