User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 806 System Manual
4.10.2.7.2 Resetting Statistics for the MS State Change Functionality
Run the following command to reset statistics for the MS state change
functionality:
npu# clear msscfn statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.8 Managing Statistics for RADIUS
This section describes the commands to be used for:
 “Displaying Statistics for RADIUS” on page 806
 “Resetting Statistics for RADIUS” on page 808
4.10.2.8.1 Displaying Statistics for RADIUS
You can display statistics counters that provide information about the access,
postpaid, and prepaid accounting requests and responses processed by the
RADIUS function. The following table lists the statistics counters for the RADIUS
function:
NOTE
The privilege level of this command is 15.
Table 4-38: Statistics Counters for RADIUS
Statistics Counter Indicates the number of...
msscfnMsscReqTx MS state change requests transmitted
by the MS state change functionality
(NPU). This does not include
retransmissions.
msscfnMsscReqRtx MS state change requests
retransmitted by the MS state change
functionality (NPU).
msscfnMsscReqRx MS state change requests received by
the MS state change functionality
(NPU).
msscfnMsscReqDrop MS state change requests dropped by
the MS state change functionality
(NPU).