User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 807 System Manual
Run the following command to display statistics for RADIUS.
npu# show radius statistics
After you run this command, the statistics for RADIUS are displayed.
msscfnMsscRspTx MS state change responses transmitted
by the MS state change functionality
(NPU). This does not include
retransmissions.
msscfnMsscRspRtx MS state change responses
retransmitted by the MS state change
functionality (NPU).
msscfnMsscRspRx MS state change responses received
by the MS state change functionality
(NPU).
msscfnMsscRspDrop MS state change responses dropped by
the MS state change functionality
(NPU).
msscfnMsscRspAckTx MS state change response ACK
messages transmitted by the MS state
change functionality (NPU).
msscfnMsscRspAckRx MS state change response ACK
messages received by the MS state
change functionality (NPU).
msscfnMsscRspAckDrop MS state change response ACK
messages dropped by the MS state
change functionality (NPU).
msscfnMsUnsuppSecCap MS network entry failures because of
unsupported security capabilities.
msscfnMsSecCapMismatch MS network entry failures because of
unsupported security capability
mismatch.
Command
Syntax
npu# show radius statistics
Privilege
Level
1
Table 4-38: Statistics Counters for RADIUS
Statistics Counter Indicates the number of...