User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 810 System Manual
4.10.2.9.2 Resetting DHCP Server Statistics
Run the following command to reset statistics for the DHCP server:
npu# clear dhcp-server statistics
After you run this command, the statistics counter is reset to 0.
4.10.2.10 Managing Statistics for the DHCP Proxy
This section describes the commands to be used for:
 “Displaying Statistics for the DHCP Proxy” on page 810
 “Resetting Statistics for the DHCP Proxy” on page 812
4.10.2.10.1 Displaying Statistics for the DHCP Proxy
You can display statistics counters for the DHCP proxy. The following table lists
the statistics counters for the DHCP proxy:
Display
Format
DHCP Server Statistics :
dhcpDiscoverRx = <value>
dhcpDiscoverDrop = <value>
dhcpRequestRx = <value>
dhcpRequestDrop = <value>
dhcpReleaseRx = <value>
dhcpReleaseDrop = <value>
dhcpLeaseTimerExp = <value>
dhcpInvalidEvent = <value>
Command
Modes
Global command mode
NOTE
The privilege level of this command is 10.
Table 4-40: Statistics Counters for the DHCP Proxy
Statistics Counter Indicates the number of...
dhcpDiscoverRx DHCP discover messages received by
the DHCP proxy.