User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 813 System Manual
Run the following command to display statistics for the DCHP relay.
npu# show dhcp-relay statistics
After you run this command, the statistics for the DHCP relay are displayed.
dhcpNakRx DHCP NACK messages received by
the DHCP relay.
dhcpNakDrop DHCP NACK messages dropped by the
DHCP relay.
dhcpIpAllocFailed Failed IP address allocations handled
by the DHCP relay.
dhcpInvalidEvent Invalid events that occurred because of
messages received by the DHCP relay.
Command
Syntax
npu# show dhcp-relay statistics
Privilege
Level
1
Display
Format
DHCP Relay Statistics :
dhcpDiscoverRx = <value>
dhcpDiscoverDrop = <value>
dhcpOfferRx = <value>
dhcpOfferDrop = <value>
dhcpRequestRx = <value>
dhcpRequestDrop = <value>
dhcpAckRx = <value>
dhcpAckDrop = <value>
dhcpNakRx = <value>
dhcpNakDrop = <value>
dhcpIpAllocFailed = <value>
dhcpInvalidEvent = <value
Table 4-41: Statistics Counters for the DHCP Relay
Statistics Counter Indicates the number of...