User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software
4Motion 816 System Manual
The following table lists the statistics counters for the physical and IP interfaces:
Run the following command to display the statistics for physical and IP interfaces:
npu# show interfaces [{[<interface-type> <interface-id>] |
internal-mgmt | external-mgmt | bearer | local-mgmt}] counters
The following table lists parameters to be used with respect to the type of
interface:
rxError Packets Erroneous packets received by the AU.
rxUnknown Packets Unknown packets received by the AU.
txBytes Bytes transmitted by the AU.
txUnicast Packets Unicast packets transmitted by the AU.
txBroadcast Packets Broadcast packets transmitted by the
AU.
txMulticast Packets Multicast packets transmitted by the
AU.
txDiscarded Packets Discarded packets transmitted by the
AU.
txError Packets Erroneous packets transmitted by the
AU.
Table 4-44: Statistics Counters for the IP Interfaces
Statistics Counter Indicates the number of...
rxBytes Bytes received by an IP interface.
rxUnicast Packets Unicast packets received by an IP
interface.
rxDiscarded Packets Discarded packets received by an IP
interface.
rxError Packets Error packets received by an
IPinterface.
txBytes Bytes transmitted by an IP interface.
txUnicast Packets Unicast packets transmitted by an IP
interface.
Table 4-43: Statistics Counters for the Physical Interfaces
Statistics Counter Indicates the number of...