User Manual

Chapter 4 - Operation and Administration Using the CLI Troubleshooting
4Motion 827 System Manual
4.11.1.2.2 Disabling Module-level Tracing
To disable tracing for one or all modules, run the following command:
npu(config)# no trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AU
Mgr}]
Specify the module if you want to disable tracing for that module. If you do not
specify the name of the module, tracing is disabled for all modules.
For example, run the following command if you want to disable tracing for WiMAX
signaling protocols:
Command
Syntax
npu(config)# trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]
{Brief|Detailed}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr|S
WDownload|Faul
tMgr|PerfMgr|S
helfMgr|SIGASN
|UserIF|AUMgr}
]
Indicates the name of the
module for which the trace
level is to be configured. If
you do not specify any value
for this parameter, the same
trace level is applied to all
modules. For more
information about these
parameters, refer
Table 4-46.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr
{Brief|Detaile
d}
Indicates the trace level to be
applied for a particular or all
modules.
Mandatory N/A
 Brief
 Detailed
Command
Modes
Global configuration mode