User Manual

Chapter 4 - Operation and Administration Using the CLI Troubleshooting
4Motion 828 System Manual
npu(config)# no trace level SIGASN
4.11.1.2.3 Displaying Trace Levels
To view the trace levels configured for one or more modules, run the following
command:
npu(config)# show trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AU
Mgr}]
Specify the module for which you want to view the configured trace level. If you do
not specify the name of the module, the trace levels configured for all modules is
displayed.
Command
Syntax
npu(config)# no trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr|S
WDownload|Faul
tMgr|PerfMgr|S
helfMgr|SIGASN
|UserIF|AUMgr}
]
Indicates the name of the
module for which tracing is to
be disabled. If you do not
specify any value for this
parameter, tracing is disabled
for all functionalities. For
more information about these
parameters, refer
Table 4-46.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr\
Command
Modes
Global configuration mode