User Manual

Chapter 4 - Operation and Administration Using the CLI Troubleshooting
4Motion 829 System Manual
4.11.2 Configuring Port Monitoring
The port monitoring feature enables you to mirror all incoming and outgoing
traffic on an interface to another interface. You can configure one interface as the
destination interface to which traffic from multiple interfaces can be mirrored.
This section describes the commands to be executed for enabling/disabling port
monitoring for source and destination interfaces or displaying configuration
information for a particular interface.
To enable port monitoring, you are required to configure:
Command
Syntax
npu(config)# show trace level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr|S
WDownload|Faul
tMgr|PerfMgr|S
helfMgr|SIGASN
|UserIF|AUMgr}
]
Indicates the name of the
module for which you want to
display the configured trace
levels.
If you do not specify any
value for this parameter, the
trace levels for all modules
are displayed. For more
information about these
parameters, refer
Table 4-46.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr
Display
Format
Module Name : Trace level
<module name> : <Trace Level>
Command
Modes
Global command mode