User Manual

Chapter 4 - Operation and Administration Using the CLI Troubleshooting
4Motion 832 System Manual
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
{destination
interface
<interface-typ
e >
<interface-id>
| source
interface
<interface-typ
e>
<interface-id>
}
Indicates whether port
monitoring is to be
enabled for a source
or destination
interface. Specify the
interface type and
interface ID for the
interface to be
configured.
Mandatory N/A Interface type:
 fastethernet
 gigabitetherne
Interface ID:
 0/1 (for Fast Ethernet
AU 1 port)
 0/2 (for Fast Ethernet
AU 2 port)
 0/3 (for Fast Ethernet
AU 3 port)
 0/4 (for Fast Ethernet
AU 4 port)
 0/5 (for Fast Ethernet
AU 5 port)
 0/6 (for Fast Ethernet
AU 6 port)
 0/7 (for Fast Ethernet
AU 7 port)
 0/8 (for Fast Ethernet
MGMT port)
 0/9 (for Gigabit
Ethernet CSCD port)
{ rx | tx |
both }
Indicates whether the
incoming, outgoing or
both types of traffic is
to be mirrored for the
source interface.
Optional Both
 rx
 tx
 both
Command
Modes
Global configuration mode