User Manual

Appendix B - Software Upgrade Upgrading the NPU
4Motion 852 System Manual
An error may occur while:
 Downloading the software image from the TFTP server
 Decompressing the downloaded file
 Validating the downloaded file
 Copying of the software image to the NPU flash
Run the following command to view the download status:
npu# show download status npu
After you run the above command, the TFTP server address, image name and
version, download status, and the number of bytes that have been downloaded,
are displayed.
IMPORTANT
An error may occur if you execute this command when no download procedure is in progress.
Command
Syntax
npu# show download status npu
Display
Format
Mananged Object : NPU
Image Name : <Downloaded Image Name>
Software version server : <IP Address of TFTP Server>
Download Status : <Download Status>
Download Bytes : <Bytes Downloaded>
Command
Modes
Global command mode