User Manual

Appendix B - Software Upgrade Upgrading the AU
4Motion 863 System Manual
Specify the AU slot ID to display the AU-to-image mapping for a specific AU slot. If
you want to view the default AU-to-image mapping, specify default. If you do not
specify the slot ID or default, all the AU-to-image mappings are displayed.
B.3.5 Deleting the AU-to-Image Mapping
Run the following command to delete an existing AU-to-image mapping:
npu# delete au
<au slot-id> mapping
Specify the AU slot ID for which you want to delete the existing mapping. After you
delete this mapping, the AU boots up using the default AU-to-image mapping after
the next AU reset.
Command
Syntax
npu# show au [{<au slot-id|default>}] mapping
Syntax
Description
Parameter Description Presence Default
Value
Possible
Value
<au
slot-id|defaul
t>
Indicates the AU for which the
AU slot to image mapping is
to be displayed.
If you do not specify a value
for this parameter, all the
AU-to-image mappings are
displayed.
Mandatory N/A
 1, 2, 3, 4, 7,
8, 9 (Valid
slot ID)
 default: if
you want to
display the
default
AU-to-imag
e mapping
Command
Modes
Global configuration mode
Display
Format
AU slot id Software image
<AU slot-id> <Image Name>
Command
Syntax
npu# delete au <au slot-id> mapping