User Manual

4Motion Configuration Using AlvariSTAR 4Motion Configuration
npu# c t
npu(config)# snmp-mgr ReadCommunity public ReadWriteCommunity
private
npu(config)# exit
npu# wr
Configurations saved successfully
3.1.4 Access List Definition
Create a standard Access List (ACL) (number 1) and enable the ACL
configuration mode. This ACL allows unlimited access to the AU. This policy
can be changed later via the AlvariSTAR configuration screens.
npu# c t
npu(config)# ip access-list standard 1
npu(config-std-nacl)# permit any any
npu(config-std-nacl)# exit
npu(config)# exit
npu# wr
Configurations saved successfully
3.1.4.1 Virtual Interfaces
Enable the NPU and AU virtual interfaces configuration mode and attach
the above ACL to the NPU and AU virtual interfaces.
npu# c t
npu(config)# interface all-au
npu(config-acl)# ip access-group 1
npu(config-acl)# exit
npu(config)# exit
npu# wr
Configurations saved successfully
3.1.5 Default Route Configuration
This part is applicable only if the AlvariSTAR server is not on the same
subnet as the External Management interface of the BTS. In this case you
must add a default route or specific route to the AlvariStar server network.
4Motion - DN1031 4