User Manual

4Motion Configuration Using AlvariSTAR 4Motion Configuration
Figure 1: L1\L2 Connectivity
Table 2: L1\L2 Connectivity
Category Parameter Name Value Notes
NMS connectivity mode In band MGMT and data are
connected through the
same port and separated
by VLAN
Site VLAN configuration Bearer VLAN ID 11 Default VLAN
Site VLAN configuration External management
VLAN ID
12 Default VLAN
Ethernet ports (backhaul) Administrative port state Up
3.2.1.1 Connectivity Diagram (In-band)
The following diagram describes the In-band connectivity mode, where
VLAN is used to differentiate between the bearer and NMS IP domains on
the DATA port. The bearer VLAN is used for the bearer IP domain and the
external-management VLAN is used for NMS IP domain. The MGMT port is
used for Local Management IP interface.
4Motion - DN1031 6