User Manual

4Motion Configuration Using AlvariSTAR 4Motion Configuration
Figure 4: AU
Table 5: AU Configuration
Parameter name Value Notes
Type 3 DSP Typically used. Note that AU may support
also 4DSP
Ports 4 Channels Default for 4Motion AU cards
Bandwidth 20
AU number According to the physical slot
3.2.6 ODU
1. Select Equipment > External > ODU from the navigation tree.
2. Right-click on the ODU icon and click Create – a new ODU ID will open
(see Figure 5).
3. Select the ODU type According to the ODU installed.
4. Select the ODU number.
5. Click Apply to accept the changes.
4Motion - DN1031 10