User Manual

4Motion - DN1031 14
4Motion Configuration Using AlvariSTAR 4Motion Configuration
3.2.10 Service Group
This section describes the configuration of service interfaces and service
groups.
3.2.10.1 Service Interface
1. Select ASNGW > Service Group > Service Interfaces from the navigation
tree.
2. Two service interfaces must be defined: one for Data and one for
management. Add service interfaces; define the service using Figure 9,
Figure 10 and Table 7.
3. Click Apply to accept the changes.
For an example of IP-IP and Service group-IP configuration, refer to Annex
A.
NOTE
All configuration referring to Management is relevant only when working with StarACS.
Figure 9: Service Interfaces - Data