User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 706 System Manual
For example, to define Bearer Traffic QoS Marking Rule 1 for BS 66053, run the
following command:
npu(config-bs-66053)# bearertrafficqos 1
4.8.24.2 Configuring Bearer Traffic QoS Marking Rule Parameters
To configure the Bearer Traffic QoS Marking Rule parameters, run the following
command:
npu(config-bs-66053-bearertrafficqos-1)# mrkngrule [rule-status {Enable |
Disable}] [rule-name <string (32)>] [srvcflow-datadeliverytype {uGS | bE | eRTVR
| any}] [srvcflow-trafficpriority <(0 to 7 StepSize 1) | (255 to 255 StepSize 1)>]
[srvcflow-mediaflowtype <string (32)>] [enable-srvcflow-mediaflowtype {TRUE |
FALSE}] [outerdscp <(0 to 63 StepSize 1)>] [bp8021p <(0 to 7 StepSize 1)>]
Command
Syntax
npu(config-bs-66053)# bearertrafficqos <(1 to 16383 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
bearertraffi
cqos <(1 to
16383
StepSize 1)>
The Bearer Traffic QoS
Marking Rule number
Mandatory 1 - 16383
Command
Modes
BS configuration mode
NOTE
The following examples are for BS Bearer Traffic QoS Marking Rule configuration mode for
bs-66053, bearer traffic qos marking rule (bearertrafficqos)-1.
IMPORTANT
When creating a new Bearer Traffic QoS Marking Rule Rule, the mandatory parameters must be
configured.